A Leader in Paper Shredder Equipment

Skip to Main Content »

Your shopping cart is empty

Shredder Resources

Dahle CleanTEC Shredders


CleanTEC Filtration

CleanTEC Filtration

Dahle’s fine dust filtration systems collects dust from just above the cutting cylinders. The dust is pulled into the patented CleanTEC filter system then exhausted out through the filter located on the back of the machine. The filter catches up to 98% of the fine dust thus creating a healthier and cleaner work environment. 



Safe Technology

Safe Technology

Dahle’s new Safe Technology System offers the latest safety features available on shredders in today’s market. In the event of an emergency and if you need to shut down the shredder, you don’t have to look for the stop button. With one of Dahle’s new CleanTEC shredders you only need to tap the top of the shredder or just say “STOP” and shredder instantaneously stops. Another safety feature Dahle has added is electronic sensors located inside the steel reinforced feed opening. If your fingers get too close to the feed opening, the electronic sensors will shut down the shredder. One last safety feature is an emergency switch on the rear of the machine that adds another level of protection. 


Electronic Sensing Protection (ESP)

Electronic Sensing Protection (ESP)

Dahle’s (ESP) Electronic Sensing Protection) can detect how many sheets of paper you are attempting to feed into the shredder. The command dial will light up (Green, Yellow or Red) giving you a visual indicator and will not allow you to exceed the sheet capacity of the shredder. If the dial lights up red the shredder will not shred. This feature saves times by not allowing you to over-feed the shredder. 



SmartPower

SmartPower

Ever business is looking for ways to save money, one simple way is to buy energy efficient equipment. Dahle’s new Smart Power Energy Management System is one way to do it. A Dahle shredder will shut itself down in multi-stages. After you are finished shredding and there is no active after 10 minutes your shredder will go into a sleep mode, reducing power consumption. After 30 minutes of inactivity your shredder will completely power off reducing your power consumption to 0%.



EvenFlow Lubricator

EvenFlow Lubricator

All Dahle CleanTEC shredders come with the new built-in Even Flow Lubricator. If you’re in a busy office environment you can never be sure how often or how much your shredder is being oiled. A properly oiled shredder will save money, runs better, has less paper jams and last longer. 



Made In Germany

Made In Germany

All Dahle shredders are manufactured in Germany. The cutting cylinders are made from a solid piece of German Solingen steel and come with a lifetime warranty. Dahle Burotechnik GmbH has been manufacturing precision equipment for 80 years. When you buy a Dahle shredder you can be assured you are getting a quality machine that will give you years of trouble free service. 



Destroyit Shredders

SPS Safety Protection System  SPS® (Safety Protection System) package consist of a transparent safety shield located the feed opening. It’s electronically controlled and protects fingers, clothing and jewelry from being caught in the feed opening.

 

Easy Switch Destroyit new “Easy Switch” uses color codes and back-lit symbols to show operational status. The Easy Switch helps to avoid paper jams, indicates when shred bag is full, cabinet door is open and protects against overheating.

SmartPower

 

 

 ESM® (Energy Saving Mode) your Destroyit shredder will shut down after 1 hour of inactivity.

 

 

 

 

Electronic Capacity Control  ECC (Electronic Capacity Control) indicator helps prevent paper jams. The shredder will automatically detect if you are attempting to over-feed the machine.

Destroyit models 2604 cross cut, Destroyit 3105 and Destroyit 4105 come with a factory installed automatic oil injection system that ensures optimal performance at all times.

High quality, hardened steel cutting shafts take staples, paper clips, and credit cards (strip-cut and 3/16" x 1 1/2" cross-cut models take CDs). Super micro-cut (SMC) model meets all NSA/CSS specifications and is DOD approved.

Quiet and powerful single phase motor rated for continuous operation.

High quality wooden cabinet mounted on casters.

DESTROYIT WARRANTY

  • Lifetime limited warranty on strip- and cross-cut cutting shafts and wheels
  • 1 year limited warranty on super micro-cut cutting shafts and wheels
  • NEW: 3 year limited warranty on all other parts, excluding wearables (deskside and centralized office models)
  • NEW: 90 day limited warranty on labor or exchange at MBM's discretion (deskside and centralized office models)
  • 1 year warranty on all other parts, excluding wearables (high capacity and super micro-cut models)

Tags

Paper Shredder | High Security Shredder | Industrial Paper Shredder | Office Shredder | Commercial Shredder | Heavy Duty Shredder | Cross Cut Shredder | Deskside Paper Shredder | Dahle Shredder | Dahle CleanTech Shredders | Destroyit Shredder | Formax Shredder | Intimus Shredder | Paper Shredder Phoenix | Shredder Specials | Hard Drive Shredders & Degaussers | Cardboard Shredder | Deployment Shredder | Shredder Supplies | Destroyit Shredder Oil | Dahle Shredder Oil